Product features
- 4 × 22 VDC, 25 mA stabilized outputs
- Outputs are galvanic isolated from each other
- Overcurrent-protection with limiter characteristics
- 190-250 VAC / 90-250 VDC power supply
- TS-35 rail mounting
- 12.5 mm width only
The DT2014 Four-channel Power Supply is designed primarily to supply power for two-wire 4-20 mA transmitters.
The unit provide four galvanically isolated 22 VDC, 25 mA stabilized outputs. The outputs are overcurrent-protected with limiter characteristics.
A green indicator shows the power OK status for each output.
The 12.5 mm instrument width assure a high density mounting on the rail.
Safety data: | |
---|---|
The outputs and the Mains are galvanic isolated from each other; the isolation is in compliance with the standard EN 61010-1. | |
Pollution level: | 2 |
Overvoltage group: | II |
Test voltage between the outputs: | 1 kV DC |
Overcurrent protection in installation: | 4 A |
Output parameters: | |
Number of outputs (channels): | 4 |
Output voltage: | 22 VDC @ 4 × 25 mA 22.5 VDC @ 4 × 20 mA ~25 VDC @ unloaded |
Output current: | 25 mA (nominal) |
Output resistance: | 10 ohm @ 2-25 mA |
Output noise voltage: | 50 mV p-p (20 MHz bandwidth) |
Overcurrent protection: | 28-32 mA, limiter characteristic |
Overload time without damage: | 48 hours (all of the outputs are shorted) |
Power supply regulation: | 2% (in the whole supply voltage range) |
Indicators: | |
Indicators: | |
Power supply: | |
Power supply: | 190-250 VAC / 90-250 VDC |
Power consumption: | 4.2 VA @ full load 1.2 VA @ no load |
Ambient conditions: | |
Operating temperature range: | 0-50 °C |
Relative air humidity: | 90% (max., non condensing) |
Place of installation: | cabinet |
Installation: | vertical (mounting of horizontal rail) |
Electromagnetic compatibility (EMC): Accordance with the standard EN 61326 |
|
Immunity: | industrial area |
Noise emission: | Group 1, Class B |
General data: | |
Housing: | TS-35 rail-mounting housing, material: polyamide PA6.6 |
Connection: | screw-fixed type connection |
Connecting cable: | 0.25-2.5 mm2 (max.) |
Dimensions: | 12.5 × 105 × 114 mm (width × height × depth) |
Weight: | 0.11 kg |
Protection: | IP 20 |
Detailed information see in operating instructions. The Manufacturer maintains the right to change the technical data! |
Leaflet of product | Operating Instruction |